Ignition Lock Replacement for Celica Liftback (1995) - Service and Repair
/Page-1198001.png)
Ignition Lock: Service and Repair
1.
Obtain audio anti-theft code, if equipped, as outlined in Technician Safety Information.
2.
Turn ignition switch to ACC position.
3.
Insert a small diameter rod into hole located on side of lock cylinder, then while holding down pin, remove lock cylinder.
4.
Reverse procedure to install. Ensure lock cylinder is in ACC position.
5.
Reset audio coded anti-theft, if equipped, as outlined in Technician Safety Information.
