toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

M/T - Replacement Parts, Set Required|Page 3911 > < Fluid - M/T|Capacity Specifications|Page 3905
Page 1
background image

Synchronizer Hub: Technical Service Bulletins
M/T - Replacement Parts, Set Required

REF.: TRANSMISSION & CLUTCH

NO.: TC95-008

DATE: AUGUST 18, 1995

MODEL: EL, AE, ST & SW

PARTS F9R C5 #, C14 #, & C15 # MANUAL TRANSAXLES

For replacement of manual transaxle parts on the Tercel, Paseo, Corolla, Celica and MR2, refer to the following information:

When replacing the Hub Sleeve No. 2 or Reverse Gear on C5 #, C14 #, and C15 # manual transaxles, use the applicable parts replacement sets listed
below along with applicable 2nd or 3rd gear (when listed). The parts listed must be replaced as a set due to the adoption of an uneven pitch chamfer for
2nd and 3rd gears.

PART NUMBER INFORMATION:

Hub Sleeve No. 2 (Before June 1990 Production Vehicles): When replacing Hub Sleeve No. 2 on vehicles Produced before June 1990 (all transaxle
serial numbers), refer to the table.

M/T - Replacement Parts, Set Required|Page 3911 > < Fluid - M/T|Capacity Specifications|Page 3905