Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
Wheel Speed Sensor: Service and Repair
Front
Front Speed Sensor
REMOVAL
1.
Disconnect the wheel speed sensor from the wiring harness.
2.
Remove the wiring holders from sensor wiring lead.
3.
Remove the sensor bolt and remove sensor from steering knuckle.
INSTALLATION
1.
Install sensor in steering knuckle and install and tighten the sensor bolt. See SPECIFICATIONS.
2.
Check that there is no clearance between the sensor and the axle carrier.
3.
Reinstall the sensor lead in the wiring holders.
4.
Connect the wheel speed sensor to the wiring harness.