Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
-
Inspect parking brake lining and disc for proper contact
-
Measure clearance between parking brake shoe and lever
-
Using a feeler gauge, measure the clearance. Standard clearance: Less than 0.35 mm (0.0138 in) If the clearance is not within specification, replace
the shim with one of the correct size.
-
Remove the parking brake lever, and install the correct size shim. If necessary, replace shim.
-
Install the parking brake lever with a new C-washer.
-
Remeasure the clearance.
REASSEMBLE PARKING BRAKE