Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
/Page-296006.png)
2. After aligning the matchmark, hold the timing belt. And turn the crankshaft pulley clockwise, and align its groove with timing mark "0" of the
No.1 timing belt cover.
(When matchmark is out of alignment counterclockwise)
1. Align the matchmark by pulling the timing belt up on the No.1 idler pulley side while turning the crankshaft pulley clockwise
2. After aligning the matchmark, hold the timing belt. And turn the crankshaft pulley counterclockwise, and align its groove with timing mark
"0" of the No.1 timing belt cover.
(b) Using SST 09213-31021, remove the pulley.
HINT: (When re-using timing belt)
Remove the pulley without turning it.
