Removing Timing Belt: Celica Liftback L4-122 1998cc 20L DOHC Turbo (3S-GTE) (1992)
Torque: 52 N.m (530 kgf.cm, 38 ft.lbf)
19. Install RH engine mounting insulator.
Install the mounting insulator with the through bolt and two nuts
Torque:
Through bolt
87 N.m (890 kgf.cm, 64 ft.lbf)
Nut
52 N.m (530 kgf.cm, 38 ft.lbf)
20. Install RH engine mounting stay.
Install the mounting stay with the bolt and nut.
Torque: 73 N.m (740 kgf.cm, 54 ft.lbf)
21. Install PS drive belt.
Install the drive belt with the pivot bolt and adjusting bolt.
22. Install throttle body.
23. Install EGR valve and pipe.
24. Install EGR vacuum modulator and VSV.
25. Install charge air cooler.
26. Install generator.
27. Install RH engine under cover.
28. Connect cable to negative terminal of battery.
29. Check and adjust drive belts.
Alternator belt tension:
With A/C
New belt 165 ± 10 lbf
Used belt 84 ± 15 lbf
Without A/C
New belt 150 ± 25 lbf
Used belt 130 ± 20 lbf