Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
Alignment: Technical Service Bulletins
Alignment - Camber Adjusting Bolts
REF.: SUSPENSION
NO.: SU0O4-96
DATE: JULY 12, 1996
MODEL: TER, PAS, COR, CAM,
AVL, CEL, PRV
CAMBER ADJUSTING BOLTS
To increase camber adjusting capability, the steering knuckle set bolts can be replaced with new camber adjusting bolts. These new camber adjusting
bolts allow for greater movement between the steering knuckle and shock absorber assembly.
NOTE:
Vehicles which are out of alignment specifications due to a collision or worn out parts, should be inspected for damage and/or worn out parts before
performing an alignment.
To change camber, install the adjusting bolt in the lower steering knuckle mounting hole. If a camber change greater than 0.75° is required, camber bolts
can be installed in both upper and lower steering knuckle holes for camber changes up to 1.50°. See Camber Adjusting Bolt Table for model, part
number and bolt selection.