Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
/Page-756001.png)
Axle Shaft: Service and Repair
Axle Shaft, Conventional Fixed/Floating
Axle Shaft, Bearing & Oil Seal (AWD)
Fig. 1 Axle Shaft Bearing & Oil Seal Replace.
W/ALL WHEEL DRIVE
1.
Remove axle shaft from axle hub.
2.
Remove bearing inner race (outer) from axle shaft, Fig. 1.
3.
Remove dust cover, then the inner and outer oil seals.
4.
Remove hole snap ring.
5.
Remove bearing.
6.
Install bearing.
7.
Install hole snap ring and outer seal.
8.
Install dust cover, axle shaft and inner oil seal.
9.
Install axle carrier with axle hub. Install carrier with axle hub. Place rear axle carrier to the shock absorber lower bracket. Install the two attaching
bolts and nuts. Tighten nuts to specifications.
10.
Temporarily install the No. 2 suspension arm to the axle carrier and the No. 1 suspension arm to the axle carrier.
11.
Temporarily install the strut rod to the axle carrier.
12.
Install parking brake cable, parking brake assembly and rotor disc. Install brake caliper and torque attaching bolts to specifications.
