Celica Liftback L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1992)
HINT: Do not mount the surface of No.2 differential case which contacts with bushing in a vise.
Referring to the table, select the thrust washer which will ensure that the backlash is within specification. Try to select a washer of the same
size.
6. INSTALL SNAP RING
Using snap ring pliers, install the shaft snap ring toward as shown.
HINT: Before installing the shaft snap ring, wrap vinyl tape around the case prevent from damage.
7. CHECK AND ADJUST FRONT DIFFERENTIAL SIDE GEAR THRUST CLEARANCE
(Differential Left Case)
a. Install the No.2 side gear thrust washer, (Temporarily install) 1.0 mm (0.039 in.) size No.2 side gear thrust washer, front differential side gear
thrust washer, side gear and No.2 case assembly.
HINT: Engage the front differential side gear and pinion gear of No.2 case.