Celica ST Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1998)
_mfi/Page-551001.png)
Vehicle Speed Sensor: Service and Repair
ON-VEHICLE REPAIR
1. DISCONNECT VEHICLE SPEED SENSOR CONNECTOR
2. REMOVE VEHICLE SPEED SENSOR ASSEMBLY
a. Remove the bolt and vehicle speed sensor assembly.
b. Remove the clip and speedometer driven gear from the vehicle speed sensor.
c. Remove the O-ring from the vehicle speed sensor.
3. INSTALL VEHICLE SPEED SENSOR ASSEMBLY
a. Coat a new O-ring with Automatic Transmission Fluid (ATF) and install it to the vehicle speed sensor.
b. Install the speedometer driven gear to the vehicle speed sensor with clip.
c. Install the vehicle seed sensor assembly with the bolt.
Torque: 16 Nm (160 kgf-cm, 12 ft. lbs.)
4. CONNECT VEHICLE SPEED SENSOR CONNECTOR
