Celica ST Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1998)
_mfi/Page-143001.png)
Crankshaft Position Sensor: Testing and Inspection
NOTICE: "Cold" and "Hot" in these sentences express the temperature of the sensor itself. "Cold" is from-10°C (14°F) to 50°C (122°F) and
"Hot" is from 50°C (122°F) to 100°C (212°F).
1. DISCONNECT CRANKSHAFT POSITION SENSOR CONNECTOR
2. INSPECT CRANKSHAFT POSITION SENSOR RESISTANCE
Using an ohmmeter, measure the resistance between terminals.
Resistance:
If the resistance is not as specified, replace the crankshaft position sensor.
3. RECONNECT CRANKSHAFT POSITION SENSOR CONNECTOR
