Celica ST Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1998)
_mfi/Page-1268004.png)
4. Install the drive belt.
a. Adjust drive belt tension.
b. Tighten the two bolts.
Torque: 43 Nm (32 ft. lbs.).
5. Connect the return hose.
6. Connect the two vacuum hoses.
7. Install the right hand drive shaft.
8. If the vehicle has ABS, connect the ABS speed sensor wiring harness clamp, then tighten the bolt.
9. Install the right hand engine under cover, then tighten the nine bolts.
10. Bleed the power steering system.
11. If the vehicle has ABS, check the ABS speed sensor signal.
