Celica ST Liftback L4-2164cc 2.2L DOHC (5S-FE) MFI (1998)
_mfi/Page-1020003.png)
8. LH drive shaft.
Remove dust cover.
Using Special Service Tool (SST) 09950 - 00020 or equivalent, and a press, remove the dust cover from the inboard joint tulip.
9. RH drive shaft:
Remove dust cover.
Using a press, remove the dust cover from the center drive shaft.
10. RH drive shaft.
Disassemble center drive shaft.
a. Using a screwdriver, remove the snap ring.
b. Using a press, remove the bearing case.
c. Using SST 09950 - 00020 and a press, remove the dust cover.
d. Using a snap ring expander, remove the snap ring.
