Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
Remove Wire Harness Clamp
3. Remove wire harness clamp.
4. Disconnect Level Warning Switch connector.
5. Take out fluid with syringe.
CAUTION: Do not let brake fluid remain on a painted surface. Wash it off immediately.
Disconnect Brake Lines
6. Disconnect brake lines.
Using Special Service Tool (SST) # 09023-00100, disconnect the brake lines from the Master Cylinder and 3-way union.
Torque: 15 Nm (11 ft. lbs.)
7. Remove Master Cylinder.
Remove the 2 mounting nuts and pull out the Master Cylinder, bracket and gasket.
Torque: 13 Nm (9 ft. lbs.)