Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
Connecting Rod: Service and Repair
Disassembly
DISCONNECT CONNECTING ROD FROM PISTON
1. Using Special Service Tool (SST) Piston Pin Remover & Replacer # 09221 - 25026 (Body # 09221 - 00020, Spring # 09221 - 00030, Bushing
"E" # 09221 - 00181, Guide "K" # 09221 - 00190, Guide "L" # 09221 - 00200) or equivalents, press out the piston pin from the piston.
2. Remove the connecting rod.
NOTE:
^
The piston and pin are a matched set.
^
Arrange the pistons, pins, rings, connecting rods and bearings in correct order.
