Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
Distributor: Service and Repair
Removal and Installation
COMPONENTS FOR REMOVAL AND INSTALLATION
DISTRIBUTOR REMOVAL
1. DISCONNECT HIGH-TENSION CORDS FROM DISTRIBUTOR CAP
Disconnect the high-tension cords at the rubber boot. Do not pull on the high-tension cords.
NOTICE: Pulling on or bending the cords may damage the conductor inside.
2. DISCONNECT DISTRIBUTOR CONNECTOR
3. REMOVE DISTRIBUTOR
(a) Remove the bolt, and pull out the distributor.
(b) Remove the O-ring from the distributor housing.
DISTRIBUTOR INSTALLATION
