Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
SST 07112-66040, 07112-76060
d. Remove the shims from the pressure plate.
2. REMOVE ROTOR
a. Using SST, remove the snap ring.
SST 07114-84020
ASSEMBLY CAUTION: Do not spread the point of SST too wide. Max width: 23.1 mm (0.91 in.)
ASSEMBLY NOTE: The snap ring should be installed so that its beveled side face up.
b. Using a plastic hammer, tap the rotor off the shaft.
DISASSEMBLY NOTE: Be careful not to damage the pulley when tapping on the rotor.
3. REMOVE STATOR
