toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Toyota Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)|Capacity Specifications|Page 1115 > < Toyota Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)|Capacity Specifications|Page 1113
Page 1
background image

Coolant: Testing and Inspection

NOTE:  Check the coolant level when the engine is cold.

1. Check engine coolant level at radiator reservoir

The engine coolant level should be between the LOW" and "FULL" lines.
If low, check for leaks and add engine coolant up to the "FULL" line, when the engine is cold.

2. Check engine coolant quality.

(a)

Remove the radiator cap.

WARNING:  To avoid the danger of being burned, do not remove the radiator cap while the engine and radiator are still hot, as
fluid and steam can be blown out under pressure.
 

(b) There should not be any excessive deposits of rust or scale around the radiator cap or radiator filler hole, and the coolant should be free from

oil.
If excessively dirty, clean the coolant passages and replace the coolant.

(c)

Reinstall the radiator cap.

Toyota Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)|Capacity Specifications|Page 1115 > < Toyota Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)|Capacity Specifications|Page 1113