Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
(a)
Remove the grommet and loosen the timing belt idler pulley mounting bolt.
(b) Turn the crankshaft pulley 2 revolutions from TDC to TDC.
CAUTION: Always turn the crankshaft clockwise.
(c)
Check that each pulley aligns with the marks as shown in the illustration.
If the timing marks do not align, remove the timing belt and reinstall it.
(d) Tighten the timing belt idler pulley mounting bolt.
Torque: 37 Nm (27 ft. lbs.)
(e)
Install the grommet to the No. 1 timing belt cover.
7. Check timing belt deflection.
Check that there is belt deflection at the position indicated in the illustration.
Belt deflection: At 20 N (4.4 lbs.): 5 - 6 mm (0.20 - 0.24 inch)
If the deflection is not as specified, readjust with the idler pulley.
8. Install No. 2 and No. 3 timing belt covers.
Torque: 7.4 Nm (65 inch lbs.)
9. Install crankshaft pulley.
(a)
Align the pulley set key with the key groove of the pulley, and slide on the pulley.
