Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
Engine RPM Sensor (NE signal): Service and Repair
CRANKSHAFT POSITION SENSOR REMOVAL
REMOVE CRANKSHAFT POSITION SENSOR
(a) Disconnect the sensor connector.
(b) Remove the bolt and sensor.
CRANKSHAFT POSITION SENSOR INSTALLATION
INSTALL CRANKSHAFT POSITION SENSOR
(a) Install the sensor with the bolt.
Torque: 9.3 N.m (95 kgf.cm, 82 in..lbf)
(b) Connect the sensor connector.
