toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 170 > < Diagram Information and Instructions|Page 168
Page 1
background image

Headlamp Control Module: Electrical Diagrams

HEAD RELAY

2-1:

Closed with the Light Control SW at HEAD position or the Dimmer SW at FLASH position (USA)
Closed with the Engine Running and the parking brake lever released, the Light Control SW at HEAD position or the Dimmer SW at 
FLASH position (Canada)

TAILLIGHT RELAY

5-3:

Closed with the Light Control SW at TAIL or HEAD position

D10 DOOR COURTESY SW LH

1-GROUND:Closed with the LH Door open

I13-A LIGHT AUTO CUT RELAY [INTEGRATION RELAY]

7-GROUND:

Approx. 12 Volts with the Ignition SW at ON position

6-GROUND:

Continuous with the LH Door open

10-GROUND:

Always continuous

A-2-GROUND: Always Approx. 12 Volts
A-3-GROUND: Always Approx. 12 Volts
A-4-GROUND: Continuous with the Light Control SW at HEAD position
A-1-GROUND: Continuous with the Light Control SW at TAIL or HEAD position

Diagram Information and Instructions|Page 170 > < Diagram Information and Instructions|Page 168