Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
1. Coat the assembly with power steering fluid.
2. Install a new shorter straight pin to the side front plate.
3. Install the side front plate doing the following.
a. Coat 2 new O-rings with power steering fluid and install them to the plate.
b. Install the plate to the vane pump shaft.
4. Install the vane pump rotor.
a. Install the rotor to the vane pump shaft with the inscribed mark facing outward.
b. Install a new snap ring to the vane pump shaft.
5. Install a new longer straight pin to the front housing.
6. Install the vane pump shaft with the vane pump rotor and the side front plate after doing these procedures.
