Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
a. Install the gear assembly to the front sub-frame.
b. Tighten the two gear assembly set bolts and nuts to 127 Nm (94 ft. lbs.).
2. Install the front sub-frame with the power steering gear assembly.
See: Suspension/Control Arm/Service and Repair/Front
3. Connect the two engine mountings as follows. On the front side, tighten the bolt and nut to 88 Nm (64 ft. lbs.), and on the rear side, tighten the the
bolt to 88 Nm (84 ft. lbs.).
4. Connect the right and left hand lower suspension arms to the lower ball joints. Torque the bolt and two nuts to 127 Nm (94 ft. lbs.).