Celica ST Ltd Ed Liftback L4-1762cc 1.8L DOHC MFI (1997)
6. Disconnect 3 solenoid connectors.
7. When replacing 3 shift solenoid valves.
-
Remove the 2 bolts and 3 shift solenoid valves.
Torque:
-
A bolt: 6.4 N.m (56 inch lbs.).
-
B bolt: 10 N.m (7 ft. lbs.).
8. Remove manual detent spring.
Torque: 10 N.m (7 ft. lbs.).
INSTALLATION HINT: Check that the manual valve lever is in contact with the center of the roller at the tip of the detent spring.
9. Remove valve body.
a. Remove the bolt and wire retainer.
Torque: 6.4 N.m (56 inch lbs.).
b. Remove the 17 bolts.
Torque: 10 N.m (7 ft. lbs.).
