Celica Supra L6-2759cc 5M Ser (1982)
Fuel Injector Resistor: Testing and Inspection
Fig. 33 Solenoid resistor terminal identification. Single connector type
Fig. 34 Solenoid resistor terminal identification. Two connector type
1.
Disconnect electrical connector(s) from resistor.
2.
Measure resistance between B+ terminal and terminals 10 and 20, Figs. 33 and 34.
3.
Meter should read 2-3 ohms for 2 connector resistors or 2.5-3.5 ohms for single connector resistors.
4.
If readings are not as specified, resistor is defective.