toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Throttle Opener <--> [Idle Speed/Throttle Actuator - Mechanical] > < Fuel-Cut Solenoid <--> [Fuel Shut-off Solenoid]|Testing and Inspection
Page 1
background image

Fuel Tank: Service Precautions

WARNING: Adhere to the following procedures any time the fuel system is being worked on in order to reduce the risk of fire and personal
injury:

-

Keep a dry chemical (Class B) fire extinguisher near the work area.

-

Place a "CAUTION FLAMMABLE" sign in the work area.

-

Work in a well-ventilated area. Do not smoke, and keep sparks and open flames away.

-

Wear eye protection.

-

Use caution when working near the catalytic converter to prevent the possibility of burns or fire. (The temperatures within the converter can
exceed 537°C (1000°F).)

-

Relieve the fuel system pressure prior to disconnecting fuel system components.

-

Use a suitable container to store or catch fuel.

-

Do not replace fuel pipe with fuel hose.

-

Plug all disconnected fuel line fittings and hoses.

-

After making any fuel system repairs ALWAYS inspect for fuel leaks.

-

Keep gasoline away from rubber or leather parts.

-

Do not smoke or work near an open flame when working on the fuel system.

-

Before working on the fuel system, disconnect the negative (-) terminal cable from the battery.

HINT:  Any diagnostic trouble code retained by the computer will be erased when the negative (-) terminal cable is removed. Therefore, if
necessary, read the diagnosis trouble code before removing the negative (-) terminal cable from the battery.

Throttle Opener <--> [Idle Speed/Throttle Actuator - Mechanical] > < Fuel-Cut Solenoid <--> [Fuel Shut-off Solenoid]|Testing and Inspection