Corolla/FX L4-1587cc 4A SOHC (1984)
Stabilizer Bar: Service and Repair
Fig. 9 Front suspension components. Corolla FWD & 1987-88 Tercel Sedan
1.
Disconnect stabilizer bar from front lower suspension arms, Fig. 9.
2.
Remove stabilizer bar brackets from body structure.
3.
On Corolla models, disconnect exhaust pipe from manifold.
4.
Remove stabilizer bar.
5.
Reverse procedure to install noting the following torques: exhaust pipe to manifold, 33 ft. lbs. (44 Nm); stabilizer bar brackets to body, 14 ft. lbs.
(19 Nm); and stabilizer bar to lower arms, 13 ft. lbs. (18 Nm).