Corolla/FX L4-1587cc 4A SOHC (1984)
1.
Remove cover plate.
^
Screw type cover plate:
Remove the two screws and cover plate. (See Fig. 1)
NOTE:
The screws are reusable.
^
Crimped type cover plate:
Pry up the cover plate tab using a small flat-head screwdriver and remove the plate. Do not damage the motor housing. (See Fig. 2)
NOTE:
The cover plate is not reusable.
2.
Remove the window regulator drum and wire guide from the motor housing using needle nose pliers (See Fig. 3)
CAUTION:
Do not use a flat-head screwdriver to remove the window regulator drum and wire guide.
WINDOW REGULATOR INSTALLATION:
1.
Insert the window regulator drum into the motor housing.
NOTE:
To prevent the window regulator drum and cable from coming off, do not tilt the drum, subject it to shocks or use force. if the cable comes off the
drum, do not rewind the cable or reuse it. After the window regulator is installed, do not operate it by itself (some window regulators do not utilize a
stopper).