Corolla L4-1.8L (1ZZ-FE) (2004)
/Page-318008.png)
26. REMOVE CRANKSHAFT PULLEY
a. Using SST, remove the pulley bolt.
SST 09960-10010 (09962-01000, 09963-01000)
b. Remove the crankshaft pulley from the crankshaft.
27. REMOVE V-RIBBED BELT TENSIONER ASSY
a. Remove the bolt, nut and V-ribbed belt tensioner.
HINT: Handle a jack up and down to remove the bolt.
28. REMOVE WATER PUMP ASSY
29. REMOVE TRANSVERSE ENGINE ENGINE MOUNTING BRACKET
a. Remove the 3 bolts and transverse engine engine mounting bracket.
30. REMOVE CRANK POSITION SENSOR
a. Remove the 2 bolts installing the crank position sensor.
