toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Wiring Harness, A/T > < Valve Body, A/T|Service and Repair|Page 2977
Page 5
background image

7. INSTALL VALVE BODY OIL STRAINER ASSY

Install the oil strainer with the 3 bolts.
Bolt length:

A bolt: 12 mm (0.47 inch) 
B bolt: 20 mm (0.79 inch) 
Torque: 10 Nm (100 kgf-cm, 7 ft. lbs.) 

8. INSTALL AUTOMATIC TRANSAXLE OIL PAN SUB-ASSY

a. Install the 2 magnets to the oil pan

b. Install a new gasket to the oil pan and install them to the transaxle.
c. Install the 18 bolts.

Torque: 5.3 Nm (55 kgf-cm, 48 inch lbs.) 

9. INSTALL ENGINE UNDER COVER LH

10. ADD AUTOMATIC TRANSAXLE FLUID
11. INSPECT AUTOMATIC TRANSAXLE FLUID

Wiring Harness, A/T > < Valve Body, A/T|Service and Repair|Page 2977