Corolla L4-1.8L (2ZR-FE) (2009)
(a) Connect the parking brake equalizer to the No. 3 parking brake cable assembly as shown in the illustration.
(b) Connect the parking brake equalizer to the No. 2 parking brake cable assembly.
HINT: Perform the same procedure for the No. 3 parking brake cable assembly.
7. INSTALL NO. 3 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY
(a) Install the No. 3 belt anchor reinforcement sub-assembly with the 5 bolts.
Torque: 27 Nm (275 kgf-cm, 19 ft-lbf)
(b) Install the floor carpet.
8. INSTALL NO. 2 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY
(a) Install the No. 2 belt anchor reinforcement sub-assembly with the 4 bolts.
Torque: 27 Nm (275 kgf-cm, 19 ft-lbf)
9. ADJUST PARKING BRAKE LEVER TRAVEL See: Adjustments
10. INSPECT BRAKE WARNING LIGHT See: Adjustments
11. INSTALL CONSOLE BOX ASSEMBLY
HINT: Refer to the instructions for Installation of the front console box See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Installation.
12. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
HINT: Refer to the instructions for Installation of the front seat assembly See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly (for Manual Seat)/Installation.
13. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
HINT: Refer to the instructions for Installation of the front seat assembly See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly (for Power Seat)/Installation.