toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Parking Brake Cable Assembly No.1|Page 3305 > < Parking Brake Cable Assembly No.1|Page 3303
Page 3
background image

b. Install the parking brake cable assembly No.3 with the 4 bolts and cable retainer. 

Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)

c. Connect the skid control sensor wire harness clip to the clamp.

21. INSTALL FUEL TANK PROTECTOR NO.1

a. Install the fuel tank protector No.1 with the 5 bolts.

Torque: 5.5 Nm (55 kgf-cm, 48 inch lbs.)

22. INSTALL FRONT FLOOR HEAT INSULATOR NO.2
23. INSTALL FRONT FLOOR HEAT INSULATOR NO.1
24. INSTALL EXHAUST PIPE ASSEMBLY FRONT

Parking Brake Cable Assembly No.1|Page 3305 > < Parking Brake Cable Assembly No.1|Page 3303