Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-396003.png)
7. REMOVE HEATED OXYGEN SENSOR
a. Using a clip remover, remove the clip.
b. Open the floor carpet.
c. Disconnect the heated oxygen sensor connector. (Sensor 1)
d. Remove the grommet, then pull the connector to the outside of the vehicle. (Sensor 1)
e. Disconnect the heated oxygen sensor connector. (Sensor 2)
f.
Remove the grommet, then pull the connector to the outside of the vehicle. (Sensor 2)
g. Using SST, remove the heated oxygen sensor. (Sensor 1)
SST 09224-00010
