Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-986004.png)
The plastic mesh should be secured in 16 different locations when complete. The four outermost points of the mesh (marked "X" in the diagram below)
will be secured with plastic zip ties to the 4 holes that were drilled into the bumper in step 2. Refer to the following illustration for the locations of these
tie points.
NOTE:
^
Ensure that all the plastic zip ties are snug and that the plastic mesh is installed for the best appearance.
^
Do NOT overtighten the plastic zip ties.
4.
Reinstall the front spoiler (if equipped) in reverse order of step 1.
