Corolla L4-1.8L (2ZZ-GE) (2005)
HINT:
Confirm the direction of the piping clamp claw and the SST using the illustration shown on the caution label.
B.
Push down the SST and release the clamp lock.
NOTE:
Be careful not to deform the tube when pushing the SST.
C.
Pull the SST slightly and push the release lever. Then remove the piping clamp with the SST.
D.
Remove the piping clamp from the SST.
E.
Disconnect the cooler refrigerant suction hose No. 1.
NOTE:
^
Disconnect the tube by hand only. Do not pry the tube apart.
^
Cap the open fittings immediately to keep moisture or dirt out of the system.