Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-994005.png)
5.
Disconnect Cooler Refrigerant Liquid Pipe A.
^
SST: 09870-00015
HINT:
Disconnect the same way as cooler refrigerant suction hose No. 1.
6.
Disconnect Heater Inlet Water Hose.
Using pliers, grip the claws of the clip and slide the clip and disconnect the heater inlet water hose.
7.
Disconnect Heater Outlet Water Hose.
Using pliers, grip the claws of the clip and slide the clip and disconnect the heater outlet water hose.
8.
Place Front Wheels Facing Straight Ahead.
9.
Remove Horn Button Assembly.
NOTE:
^
If the airbag connector is disconnected with the ignition switch ON, DTCs will be recorded.
^
Before working on SRS, please refer to the Technical Information System (TIS), 2005 model year Corolla Repair Manual: Supplemental
Restraint System: Supplemental Restraint System: Precaution.
A.
Using a torx socket wrench, loosen the 2 torx screws until the groove along the screw circumference catches on the screw case.
