Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-230002.png)
15. ADJUST VALVE CLEARANCE
a. Set SST
(1) Turn the crankshaft so that the related rocker arm, where the valve clearance is adjusted, is fully pushed down.
NOTICE: Remove the spark plug, then release the compression.
(2) Insert SST into the plug tube.
SST 09248-77010 (09248-07010)
NOTICE:
^
SST cannot be inserted unless the set screw is loosened.
^
Make sure that the camshaft is in the same condition as step (1).
(3) Operate the lever so that the SST seat surface comes into contact with the valve retainer, then lock them with the 2 set screws.
NOTICE:
^
Clearance between the valve retainer and SST seat surface is not allowed.
^
Be careful not to make clearance when inserting SST since a presence of clearance may unlock the keeper.
(4) Lock the set screw on the plug tube side of SST
(5) Turn the crankshaft so that the camshaft is positioned as shown in the illustration.
