Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-599002.png)
1. Inspect and verify the noise is from the fuel tank protector.
2. Inspect the fuel tank protector to fuel tank band mounting location. If it is loose/damaged proceed to step 3. If the mounting location is OK this TSB
does NOT apply.
3. Remove the fuel tank protector.
4. Remove and replace the RH fuel tank band.
5. Inspect the fuel tank protector for damage and replace if necessary.
6. Install the fuel tank protector.
7. Confirm normal vehicle operation and verify NO rattle noises are present.
