Corolla L4-1.8L (2ZZ-GE) (2005)
(09951-00630)
14. INSTALL REAR AXLE CARRIER BUSH LH
a. Align the matchmarks on the axle beam with the 2 notches of a new bushing and temporarily install the bushing to the axle beam.
b. Using SST, install the bushing to the axle beam.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04020, 09955-04051, 09957-04010, 09958-04011), 09950-60010
(09951-00620), 09710-04101
NOTICE:
^
Hang the claw of SST to the bushing deeply and firmly.
^
Do not scratch the rubber portion of the bushing.
^
Do not deform the bushing rib.
15. INSTALL REAR AXLE CARRIER BUSH RH
HINT: Install the RH side by the same procedures with the LH side.
SST 09950-40011 (09951-04020, 09952-04010, 09953-04030, 09954-04020, 09955-04051, 09957-04010, 09958-04011), 09950-60010
(09951-00620), 09710-04101
16. TEMPORARILY TIGHTEN REAR AXLE BEAM ASSY
a. Support the rear axle beam with a jack.
b. Install the rear axle beam and 2 bolts, and temporarily tighten the 2 nuts.