Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-690003.png)
9. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
a. Using a 8 mm hexagon wrench and a hammer, remove the clevis bush from the clutch pedal sub-assy.
10. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
a. Apply MP grease to inside of a new clevis bush.
b. Install the clevis bush to the clutch pedal.
HINT: Install the clevis bush from the right side of the vehicle.
11. INSTALL CLUTCH PEDAL NO.1 CUSHION
a. Using needle-nose pliers, install the No.1 cushion to the clutch pedal.
12. INSTALL CLUTCH PEDAL BUSH
a. Apply MP grease to both side of 2 new bushes.
b. Install the 2 bushes to the clutch pedal.
13. INSTALL CLUTCH PEDAL PAD
