Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-696003.png)
10. INSPECT CLUTCH COVER ASSY
a. Using vernier calipers, inspect the diaphragm spring for the depth and width of wear.
Maximum:
A (Depth): 0.5 mm (0.020 inch)
B (Width): 6.0 mm (0.236 inch)
If necessary, replace clutch cover assy.
11. INSPECT FLYWHEEL SUB-ASSY
a. Using a dial indicator, inspect the flywheel sub-assy runout.
Maximum runout: 0.1 mm (0.004 inch)
If necessary, replace the flywheel sub-assy.
12. INSPECT CLUTCH RELEASE BEARING ASSY
a. Check that the clutch release bearing assy moves smoothly without abnormal resistance by turning the sliding parts of the clutch release
bearing assy (contact surfaces with the clutch cover) while applying force in the axial direction.
b. Inspect the clutch release bearing assy for damage or wear.
HINT: Replace the release bearing assy an necessary.
13. INSTALL CLUTCH DISC ASSY
a. Insert SST in the clutch disc assy, then insert them in the flywheel sub-assy.
SST 09301-00210
