Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-699006.png)
a. Separate the inboard joint boot from the inboard joint assy LH.
17. REMOVE FRONT DRIVE INBOARD JOINT ASSY LH
a. Remove the old grease from the inboard joint sub-assy LH.
b. Put matchmarks on the inboard joint sub-assy LH and outboard joint shaft assy.
NOTICE: Do not punch for the marks.
c. Remove the inboard joint sub-assy LH from the outboard joint shaft assy.
d. Using a snap ring expander, remove the inner LH shaft snap ring.
e. Put matchmarks on the outboard joint shaft assy and tripod joint assy.
NOTICE: Do not punch for the marks.
f.
Using a brass bar and a hammer, remove the tripod joint assy from the outboard joint shaft assy.
NOTICE: Do not tap the roller.
g. Remove the inboard joint boot LH No.2 clamp, inboard joint boot and inboard joint boot LH clamp.
18. REMOVE DRIVE SHAFT DAMPER
