Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-717004.png)
NOTICE: The projecting part of the lock should face upward when the shift cable is installed.
b. Install the cable outer spring to the lock.
NOTICE: Make sure that after installation the cable outer spring is moved to the place shown in the illustration.
c. Connect the end of the shift cable and install the clip to the shift lever assy.
11. INSTALL CONSOLE BOX SUB-ASSY REAR
12. INSTALL PARKING BRAKE HOLE COVER SUB-ASSY
13. INSTALL CONSOLE PANEL UPPER
14. INSTALL SHIFT LEVER KNOB SUB-ASSY
