Corolla L4-1.8L (2ZZ-GE) (2005)
7. REMOVE WINDSHIELD WIPER MOTOR & LINK ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 bolts.
c. Slide the wiper link assembly to vehicle's passengers side. Disengage the meshing of the rubber pin and remove the windshield wiper motor &
link assembly.
8. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
a. Using a screwdriver and disengage the meshing of 2 rods at the clank arm pivot of the windshield wiper motor assembly.
b. Using a torx socket wrench (T30), remove the 2 torx bolts and the windshield wiper motor assembly.