Corolla L4-2.4L (2AZ-FE) (2010)
Amplifier: Service and Repair
Installation
AUDIO / VIDEO: STEREO COMPONENT AMPLIFIER: INSTALLATION
1. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY
(a) Install the stereo component amplifier assembly with the 2 bolts.
(b) Connect each connector.
2. INSTALL AUDIO AMPLIFIER COVER
(a) Engage the 2 clips and install the audio amplifier cover.
3. INSTALL FRONT SEAT ASSEMBLY RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Manual Seat)/Installation
4. INSPECT FRONT SEAT SLIDE ADJUSTER LOCK See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Seat
Assembly (for Manual Seat)/Installation
5. INSTALL INNER SEAT TRACK COVER RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Manual Seat)/Installation
6. INSTALL OUTER SEAT TRACK COVER RH
HINT
Use the same procedure for the RH side and the LH side See: Body and Frame/Seats/Service and Repair/Removal and
Replacement/Front Seat Assembly (for Manual Seat)/Installation
7. INSTALL FRONT SEAT HEADREST ASSEMBLY RH
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag)
9. INSPECT SRS WARNING LIGHT (w/ Front Seat Side Airbag)
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System