Corolla L4-2.4L (2AZ-FE) (2010)
(d) Engage the 2 pins and install the steering pad switch.
(e) Install the screw.
Torque : 2.4 Nm (24 kgf-cm, 21 in-lbf)
(f) Engage the clamp.
(g) Connect the connector to the spiral cable.
3. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
4. INSTALL LOWER NO. 3 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
5. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. INSPECT STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
8. INSPECT SRS WARNING LIGHT
See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System