Corolla L4-2.4L (2AZ-FE) (2010)
HINT
Use the same procedure for the RH side and LH side.
80. REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY
(a) Using a moulding remover, disengage the 4 claws.
NOTICE:
Do not forcibly pry the assist grip covers to prevent them from being deformed.
HINT
Gently pry on the assist grip covers as shown in the illustration to remove them.
(b) Pull off the 2 assist grip covers by hand.
(c) Disengage the 2 clips and remove the front assist grip sub-assembly.
(d) Remove the 2 clips from the vehicle body.
HINT
Use the same procedure for the RH side and LH side.
81. REMOVE REAR ASSIST GRIP SUB-ASSEMBLY
(a) Using a moulding remover, disengage the 4 claws.