Corolla L4-2.4L (2AZ-FE) (2010)
41. CONNECT FRONT SEAT OUTER BELT ASSEMBLY LH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat
Outer Belt Assembly/Installation
42. INSTALL LAP BELT OUTER ANCHOR COVER (for LH Side) See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front
Seat Outer Belt Assembly/Installation
43. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
(a) Align the alignment mark (pink) on the weatherstrip and the protruding portion on the body indicated by the arrow in the illustration, and
install the rear door opening trim weatherstrip LH.
NOTICE:
After installation, check that the corners fit correctly.
44. INSTALL REAR DOOR SCUFF PLATE LH
(a) Engage the 6 claws and install the rear door scuff plate LH.
45. INSTALL UPPER CENTER PILLAR GARNISH RH
HINT
Use the same procedure for the RH side and LH side.
46. CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat
Outer Belt Assembly/Installation
47. INSTALL LOWER CENTER PILLAR GARNISH RH