Corolla L4-2.4L (2AZ-FE) (2010)
/Page-2446001.png)
Power Mirror Switch: Testing and Inspection
MIRROR (EXT): OUTER MIRROR SWITCH: INSPECTION
1. INSPECT OUTER MIRROR SWITCH ASSEMBLY
(a) Inspect the L position of the left/right adjustment switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance (for Left Side):
(2) If the result is not as specified, replace the switch assembly.
(b) Inspect the R position of the left/right adjustment switch.
(1) Measure the resistance according to the value(s) in the table below.
Standard Resistance (for Right Side):
(2) If the result is not as specified, replace the switch assembly.
