Toyota Workshop Service and Repair Manuals

Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR (w/ VSC): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT WHEEL RH

3. REMOVE ENGINE UNDER COVER RH

4. REMOVE V-RIBBED BELT (for 2ZR-FE)   See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive

Belt/Service and Repair/Removal

5. REMOVE V-RIBBED BELT (for 2AZ-FE)   See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive

Belt/Service and Repair/Removal

6. REMOVE GENERATOR ASSEMBLY (for 2AZ-FE)   See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and

Replacement/Removal

7. REMOVE GENERATOR ASSEMBLY (for 2ZR-FE)   See: Starting and Charging/Charging System/Alternator/Service and Repair/Removal and

Replacement/Removal

8. DRAIN BRAKE FLUID